Search By Harmonized Code System

HS Code - 39

HS Code

Description

39 PLASTICS AND ARTICLES THEREOF
3901 I. PRIMARY FORMS
3901 Polymers of ethylene, in primary forms
390110 Polyethylene having a specific gravity of less than 0,94
39011010 Linear polyethylene
3901101020 High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not
3901101090 Other
39011090 Other
3901109030 Polyethylene granules, containing by weight 10|% or more but not more than 25|% of copper
3901109090 Other
390120 Polyethylene having a specific gravity of 0,94|or more
39012010 Polyethylene in one of the forms mentioned in note|6(b) to this chapter, of a specific gravity of 0,958|or more at 23|°C, containing: -|50|mg/kg or less of aluminium, -|2|mg/kg or less of calcium, -|2|mg/kg or less of chromium, -|2|mg/kg or less of iron,
39012090 Other
390130 Ethylene-vinyl acetate copolymers
3901300010 For cavity filling, for use in certain types of aircraft
3901300099 Other
390140 Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0,94
3901400010 High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not
3901400030 Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method|in the form of pellets with: -|more than 10|% but not more than 20|% by weight of copolymer, -|a melt flow rate (MFR 190°C/2,16|kg) of 0,7|g / 10|min or more|bu
3901400090 Other
390190 Other
39019030 Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35|% or less of styrene, in one of the form
39019080 Other
3901908010 For cavity filling, for use in certain types of aircraft
3901908053 Other
3901908053 Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with -|an acrylic acid content of 18,5|% or more but not more than 49,5|% by weight (ASTM D4094), and -|a melt flow rate of 10g/10|min (MFR 125|°C/2.16|kg, ASTM D1238) or more
3901908055 Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: -|an acrylic acid content of 6|% or more but not more than 50|% by weight, and -|a melt flow rate of 1g/10|min or more at 190|°C/2.16|kg (measured using ASTM D1238)
3901908067 Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11|% by weight|or more
3901908073 Mixture containing by weight -|80|% or more, but not more than 94|% of chlorinated polyethylene (CAS RN 64754-90-1) and -|6|% or more, but not more than 20|% of styrene-acrylic copolymer (CAS RN 27136-15-8)
3901908091 Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid
3901908092 Chlorosulphonated polyethylene
3901908093 Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets
3901908094 Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35|% of styrene
3901908097 Chlorinated polyethylene, in the form of powder
3901908099 Other
3902 Polymers of propylene or of other olefins, in primary forms
390210 Polypropylene
3902100020 Polypropylene, containing no plasticiser, -|of a melting point of more than 150|°C (as determined by the ASTM D 3417|method), -|of a heat of fusion of 15|J/g or more but not more than 70|J/g, -|of an elongation at break of 1|000|% or more (as determ
3902100040 Polypropylene, containing no plasticiser: -of a tensile strength: of 32-77 MPa (as determined by the ASTM D638 method);  -of a flexural strength of 50-105 MPa (as determined by the ASTM D790 method);  -of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5
3902100090 Other
390220 Polyisobutylene
3902200010 Polyisobutylene, of a number average molecular weight (M@n) of 700|or more but not more than 800
3902200020 Hydrogenated polyisobutene, in liquid form
3902200090 Other
390230 Propylene copolymers
3902300010 For cavity filling, for use in certain types of aircraft
3902300020 Other
3902300020 Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene
3902300030 Hydrogenated copolymer of styrene, isoprene and butadiene, containing by weight 28 % or more, but not more than 55 % of propylene
3902300091 A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40|% or less of styrene, in one of the forms mentioned in note 6|(b) to Chapter 39
3902300095 A-B-A block copolymer, consisting of: -|a copolymer of propylene and ethylene and -|21|% (± 3|%) by weight of polystyrene
3902300097 Liquid ethylene-propylene-copolymer with: -|a flashpoint of 250|°C or more, -|a viscosity index of 150|or more, -|of a number average molecular weight (M@n) of 650|or more
3902300099 Other
390290 Other
39029010 A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35|% or less of styrene, in one of the forms mentioned in note|6(b) to this chapter
39029020 Polybut-1-ene, a copolymer of but-1-ene with ethylene containing by weight 10|% or less of ethylene, or a blend of polybut-1-ene with polyethylene and/or polypropylene containing by weight 10|% or less of polyethylene and/or 25|% or less of polypropylene,
39029090 Other
3902909010 For cavity filling, for use in certain types of aircraft
3902909052 Other
3902909052 Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin
3902909055 Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10|% or more but not more than 35|% of polystyrene
3902909060 Non-hydrogenated 100|% aliphatic resin (polymer), with|the following characteristics: -|liquid at room temperature -|obtained by cationic polymerisation of C-5|alkenes monomers -|with a number average molecular weight (Mn) of 370|(±|50) -|with a w
3902909065 Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39
3902909070 Synthetic poly-alpha-olefin with a viscosity of 3 or more but not more than 9 centistokes (measured at 100 ° Celsius according to the ASTM D 445 method), obtained by polymerization of dodecene with or without: -not more than 40 % by weight of tetradecen
3902909075 Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form
3902909092 Polymers of 4-methylpent-1-ene
3902909094 Chlorinated polyolefins, whether or not in a solution or dispersion
3902909099 Other
3903 Polymers of styrene, in primary forms
390311 Polystyrene
390311 Expansible
390319 Other
3903190040 Crystalline polystyrene with: -|a melting point of 268|°C or more but not more than 272|°C -|a setting point of 232|°C or more but not more than 247|°C, -|whether or not containing additives and filling material
3903190090 Other
390320 Styrene-acrylonitrile (SAN) copolymers
390330 Acrylonitrile-butadiene-styrene (ABS) copolymers
390390 Other
39039010 Copolymer, solely of styrene with allyl alcohol, of an acetyl value of 175|or more
39039020 Brominated polystyrene, containing by weight 58|% or more but not more than 71|% of bromine, in one of the forms mentioned in note|6(b) to this chapter
39039090 Other
3903909015 Copolymer in the form of granules containing by weight: -|78|± 4|% styrene, -|9|± 2|% n-butyl acrylate, -|11|± 3|% n-butyl methacrylate,, -|1.5|± 0,7|% methacrylic acid and -|0,01|% or more but not more than 2,5|% of polyolefinic wax
3903909020 Copolymer in the form of granules containing by weight: -|83|± 3|% styrene, -|7|± 2|% n-butyl acrylate, -|9|± 2|% n-butyl methacrylate and -|0,01|% or more but not more than 1|% of polyolefinic wax
3903909033 Copolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more
3903909035 Copolymer of _α_-methylstyrene and styrene, having a softening point exceeding 113|ºC
3903909038 Polytetrafluoroethylene (CAS|RN|9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS|RN|9003-54-7), with a content by weight of each polymer of 50|% (± 1|%)
3903909045 Preparation, in form of powder, containing by weight: -|86|% or more but not more than 90|% of styrene-acrylic-copolymer and -|9|% or more but not more than 11|% of fatty acid ethoxylate (CAS|RN|9004-81-3)
3903909060 Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (M@n) of not more than 4500, in flake or powder form
3903909065 Copolymer of Styrene with 2, 5-Furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)
3903909070 Copolymer in the form of granules containing by weight: -|75|% (± 7|%) styrene and -|25|% (± 7|%) methylmethacrylate
3903909080 Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150|μm and a maximum diameter of 800|μm and containing by weight: -|minimum 65|% styrene, -|maximum 25|% divinylbenzene for use in the manufacture of ion exchange resins
3903909086 Mixture containing by weight: -|45|% or more but not more than 65|% of polymers of styrene -|35|% or more but not more than 45|% of poly(phenylene ether) -|not more than 10|% of other additives and with one or more of the following special colour ef
3903909090 Other
3904 Polymers of vinyl chloride or of other halogenated olefins, in primary forms
390410 Poly(vinyl chloride), not mixed with any other substances
3904100010 In the form of granules, for use in certain types of aircraft
3904100090 Other
390421 Other poly(vinyl chloride)
390421 Non-plasticised
3904210010 In the form of granules, for use in certain types of aircraft
3904210090 Other
390422 Plasticised
3904220010 In the form of granules, for use in certain types of aircraft
3904220090 Other
390430 Vinyl chloride-vinyl acetate copolymers
3904300030 Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: -|87|% or more but not more than 92|% of vinyl chloride, -|2|% or more but not more than 9|% of vinyl acetate and -|1|% or more but not more than 8|% of vinyl al
3904300090 Other
390440 Other vinyl chloride copolymers
3904400010 For cavity filling, for use in certain types of aircraft
3904400091 Other
3904400091 Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: -|87|% or more but not more than 92|% of vinyl chloride, -|2|% or more but not more than 9|% of vinyl acetate and -|1|% or more but not more than 8|% of vinyl al
3904400099 Other
390450 Vinylidene chloride polymers
39045010 Copolymer of vinylidene chloride with acrylonitrile, in the form of expansible beads of a diameter of 4|micrometres or more but not more than 20|micrometres
39045090 Other
3904509010 For cavity filling, for use in certain types of aircraft
3904509099 Other
390461 Fluoropolymers
390461 Polytetrafluoroethylene
3904610020 Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2|% or more but not more than 4,6|% by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1|mg/kg of extractable fluoride ions
3904610090 Other
390469 Other
39046910 Poly(vinyl fluoride), in one of the forms mentioned in note|6(b) to this chapter
39046920 Fluoroelastomers FKM
39046980 Other
3904698010 For cavity filling, for use in certain types of aircraft
3904698020 Other
3904698020 Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2)
3904698030 Copolymer of tetrafluoroethylene, hexafluoropropene and ethene
3904698081 Poly(vinylidene fluoride) (CAS RN 24937-79-9)
3904698085 Copolymer of ethylene and chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, whether or not containing fillers
3904698088 Polytetrafluoroethylene (CAS|RN|9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS|RN|9003-54-7), with a content by weight of each polymer of 50|% (± 1|%)
3904698089 Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50|% (±|2|%) by weight
3904698094 Copolymer of ethylene and tetrafluoroethylene
3904698096 Polychlorotrifluoroethylene, in one of the forms mentioned in note 6|(a) and (b) to Chapter 39
3904698097 Copolymer of chlorotrifluoroethylene and vinylidene difluoride
3904698099 Other
390490 Other
3904900010 For cavity filling, for use in certain types of aircraft
3904900090 Other
3905 Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms
390512 Poly(vinyl acetate)
390512 In aqueous dispersion
390519 Other
3905190010 For cavity filling, for use in certain types of aircraft
3905190090 Other
390521 Vinyl acetate copolymers
390521 In aqueous dispersion
390529 Other
3905290010 For cavity filling, for use in certain types of aircraft
3905290090 Other
390530 Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups
3905300010 Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors
3905300091 Other
3905300091 In the form of homopolymer resins with a viscosity (measured in 4 % aqueous solution at 20 °C) of 3 mPa·s or more but not more than 61 mPa·s and a degree of hydrolysis of 80,0 mol% or more but not more than 99,9 mol%, both measured according to the ISO 15
3905300091 Other than for the manufacturing of dry-blend adhesives, produced and sold in powder form for the carton board industry
3905300092 Other
3905300095 Other
390591 Other
390591 Copolymers
3905910010 For cavity filling, for use in certain types of aircraft
3905910040 Water soluble copolymer of ethylene and vinyl alcohol (CAS|RN|26221-27-2), containing by weight not more than 38|% of the monomer unit ethylene
3905910050 Aqueous solution consisting by weight of: -10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 306769-73-3), -not more t
3905910060 Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight: -27 % or more but not more than 33 % of copolymer, -not more than 1,5 % of ethanol
3905910070 Aqueous solution, containing by weight: -25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 748809-45-
3905910080 Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0)
3905910090 Other
390599 Other
39059910 Poly(vinyl formal), in one of the forms mentioned in note|6(b) to this chapter, of a molecular weight of 10|000|or more but not exceeding 40|000|and containing by weight: -|9,5|% or more but not more than 13|% of acetyl groups evaluated as vinyl acetate a
39059990 Other
3905999010 For cavity filling, for use in certain types of aircraft
3905999081 Other
3905999081 Poly(vinyl butyral)(CAS RN 63148-65-2): — containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and — with a median particle size (D50) of more than 0,6 mm
3905999095 Hexadecylated or eicosylated polyvinylpyrrolidone
3905999096 Polymer of vinyl formal, in one of the forms mentioned in note 6|(b) to Chapter 39, of a weight average molecular weight (M@w) of 25|000|or more but not more than 150|000|and containing by weight: -|9,5|% or more but not more than 13|% of acetyl groups
3905999097 Povidone (INN)-iodine|(CAS 25655-41-8)
3905999098 Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78|% or more but not more than 82|% of triacontyl groups
3905999099 Other
3906 Acrylic polymers in primary forms
390610 Poly(methyl methacrylate)
390690 Other
39069010 Poly[N-(3-hydroxyimino-1,1-dimethylbutyl)acrylamide]
39069020 Copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate, in the form of a solution in N,N-dimethylacetamide, containing by weight 55|% or more of copolymer
39069030 Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight 10|% or more but not more than 11|% of 2-ethylhexyl acrylate
39069040 Copolymer of acrylonitrile with methyl acrylate, modified with polybutadiene-acrylonitrile (NBR)
39069050 Polymerisation product of acrylic acid with alkyl methacrylate and small quantities of other monomers, for use as a thickener in the manufacture of textile printing pastes
39069060 Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50|% or more of methyl acrylate, whether or not compounded with silica
39069090 Other
3906909010 Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003|or 3004
3906909017 Superabsorbent polymers, insoluble in water, which result from a polymerization of acrylic monomer molecules with crosslinkers to form crosslinked polymer networks, with a high capacity to absorb and retain water and aqueous liquids
3906909023 Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS|RN|37953-21-2), with an epoxy equivalent weight of not more than 500,|in form of ground flakes with a particle size of not more than 1|cm
3906909027 Copolymer of|stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate
3906909033 Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5|µm or more but not more than 10|µm
3906909037 Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3|µm
3906909041 Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30 
3906909043 Copolymer of methacrylic esters,|butylacrylate and cyclic dimethylsiloxanes (CAS|RN|143106-82-5)
3906909050 Polymers of esters of acrylic acid with one or more of the following monomers in the chain: -|chloromethyl vinyl ether, -|chloroethyl vinyl ether, -|chloromethylstyrene, -|vinyl chloroacetate, -|methacrylic acid, -|butenedioic acid monobutyl es
3906909060 Aqueous dispersion containing by weight: -|more than 10|% but not more than 15|% of ethanol, and -|more than 7|% but not more than 11|%|of a reaction product of poly(epoxyalkylmethacrylate-co-divinylbenzene) with a glycerol derivative
3906909073 Preparation containing by weight: -|33|% or more but not more than 37|% of|butyl methacrylate - methacrylic acid copolymer, -|24|% or more but not more than 28|% of propylene glycol, and -|37|% or more but not more than 41|% of water
3906909090 Other
3907 Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms
390710 Polyacetals
3907100020 Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine
3907100090 Other
390721 Other polyethers
390721 Bis(polyoxyethylene) methylphosphonate
390729 Other
39072911 Polyether alcohols
39072911 Polyethylene glycols
3907291110 Poly(ethylene oxide) of a number average molecular weight (M@n) of 100|000|or more
3907291120 Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (M@n) of 40|000
3907291160 Preparation containing: -|α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS|RN|104810-48-2)|and -|α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]
3907291190 Other
39072920 Other
3907292020 Polytetramethylene|ether glycol|with a|weight average molecular weight (Mw) of 2|700|or more but not more than 3|100|(CAS RN 25190-06-1)
3907292025 Copolymer of propylene oxide and butylene oxide, monododecylether, containing by weight: -|48|% or more but not more than 52|% of propylene oxide and -|48|% or more but not more than 52|% of butylene oxide
3907292030 Mixture, containing by weight 70|% or more but not more than 80|% of a polymer of glycerol and 1,2-epoxypropane and 20|% or more but not more than 30|% of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone
3907292035 Mixture containing by weight: -|5|% or more but not more than 15|% of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and -|85|% or more but not more than 95|% of a copolymer of sucrose, propylene oxide and ethylene oxi
3907292040 Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 900 or more but not more than 3 600
3907292045 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated
3907292050 Poly(p-phenylene oxide) in the form of powder -|with a glasstransitiontemperature of 210|°C -|with a weight average molecular weight (Mw) of 35|000|or ore but not more than 80|000 -|with an inherent viscosity of 0,2|or more but not more than 0,6|dl/
3907292055 4-Nonylphenol, branched and linear, ethoxylated
3907292060 Polypropylene glycol monobutyl ether (CAS|RN|9003-13-8) of an alkalinity of not more than 1|ppm of sodium
3907292090 Other
39072991 Other
39072991 Copolymer of 1-chloro-2,3-epoxypropane with ethylene oxide
39072999 Other
3907299915 Poly(oxypropylene) having alkoxysilyl end-groups
3907299920 2,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (CAS RN 697278-30-1) with a number|average molecular weight (Mn) of at least 20|kDa whether or not modified with a chemical entity enabling a linkage between the PEG an
3907299930 Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)
3907299940 N-(methoxypoly (ethylene glycol) -N-(1-acetyl- (2-methoxypoly (ethylene glycol)) -glycine (CAS RN 600169-00-4) with a number average molecular weight (Mn) for polyethylene glycol of 40|kDa
3907299945 Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups
3907299950 Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient
3907299955 Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5|000
3907299960 Polytetramethylene oxide di-p-aminobenzoate
3907299990 Other
390730 Epoxide resins
3907300015 Epoxide resin, halogen-free, -|containing by weight|more than 2|% phosphoros calculated on the solid content, chemically bound in the epoxide resin, -|not containing any hydrolysable chloride or containing less than 300|ppm hydrolysable chloride, and
3907300025 Epoxide resin - containing by weight 21% or more of brome, - not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and - containing solvents
3907300040 Epoxide resin, containing by weight 70|% or more of silicon dioxide, for the encapsulation of goods of headings|8504, 8533, 8535, 8536, 8541, 8542|or 8548
3907300060 Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5)
3907300070 Preparation of epoxy resin (CAS|RN|29690-82-2) and phenolic resin (CAS|RN|9003-35-4) containing by weight: -|65|% or more but not more than 75|% of silicon dioxide (CAS|RN|60676-86-0), and -|none or not more than 0,5|% of carbon black (CAS|RN|1333-86-4)
3907300090 Other
390740 Polycarbonates
3907400025 Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of 98.5|% or more, in the form of pellets or granules, with a luminous transmittance of 88.5% or more, measured using a test sample with a thickness of 4|mm at a wav
3907400035 α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)
3907400045 α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3)
3907400070 Polycarbonate of phosgene and| bisphenol A: -|containing by weight 12|% or more but not more than 26|% of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol, -|with p-cumylphenol endcaps, and -|with a weight average molecula
3907400080 Polycarbonate of carbonic dichloride, 4,4'-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4'-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps
3907400090 Other
390750 Alkyd resins
390761 Poly(ethylene terephthalate)
390761 Having a viscosity number of 78|ml/g or higher
390769 Other
3907690010 Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol
3907690090 Other
390770 Poly(lactic acid)
390791 Other polyesters
390791 Unsaturated
39079110 Liquid
39079190 Other
3907919010 Diallyl phthalate prepolymer, in powder form
3907919090 Other
390799 Other
39079905 Thermoplastic liquid crystal aromatic polyester copolymers
39079910 Poly(ethylene naphthalene-2,6-dicarboxylate)
39079980 Other
3907998010 Poly(oxy-1,4-phenylenecarbonyl)|(CAS RN 26099-71-8), in the form of powder
3907998025 Copolymer, containing 72|% by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol
3907998030 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)
3907998035 Copolymer in form of a clear, pale yellow liquid, consisting of -|phthalic acid isomers and/or aliphatic dicarboxylic acids, -|aliphatic diols, and -|fatty acid end-caps with: -|a hydroxyl number of 120|mg KOH or more but not more than 350|mg KOH,
3907998070 Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol
3907998080 Copolymer, consisting of 72|% by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles
3907998090 Other
3908 Polyamides in primary forms
390810 Polyamide-6, -11, -12, -6,6, -6,9, -6,10|or -6,12
390890 Other
3908900010 Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6|(b) to Chapter 39
3908900030 Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine
3908900090 Other
3909 Amino-resins, phenolic resins and polyurethanes, in primary forms
390910 Urea resins; thiourea resins
390920 Melamine resins
3909200010 Polymer mixture, containing by weight: -|60|% or more but not more than 75|% of melamine resin (CAS|RN|9003-08-1), -|15|% or more but not more than 25|% of silicon dioxide|(CAS|RN|14808-60-7|or 60676-86-0), -|5|% or more but not more than 15|% of ce
3909200090 Other
390931 Other amino-resins
390931 Poly(methylene phenyl isocyanate) (crude MDI, polymeric MDI)
390939 Other
3909390010 Formaldehyde, oligomeric reaction products with aniline (CAS RN 25214-70-4)
3909390090 Other
390940 Phenolic resins
3909400020 Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices
3909400070 Polymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80°C or more but not exceeding 95°C according to standard ASTM E28-92 (CAS RN 112484-41-0)
3909400090 Other
390950 Polyurethanes
39095010 Polyurethane of 2,2′-(tert-butylimino)diethanol and 4,4′-methylenedicyclohexyl diisocyanate, in the form of a solution in N,N-dimethylacetamide, containing by weight 50|% or more of polymer
39095090 Other
3909509010 UV curable water soluble liquid photopolymer consisting of a mixture by weight of -|60|% or more of two-functional acrylated polyurethane oligomers and -|30|% (±|8|%) of mono-functional and tri-functional (metha)|acrylates, and -|10|% (±|3|%) of hyd
3909509020 Preparation containing by weight: -|14|% or more but not more than 18|% of ethoxylated polyurethane| modified with hydrophobic groups, -|3|%|or more but not more than 5|% of enzymatically modified starch, and -|77|% or more but not more than 83|% of
3909509030 Preparation containing by weight: -|16|% or more but not more than 20|% of ethoxylated polyurethane modified with hydrophobic groups, -|19|% or more but not more than 23|% of diethylene glycol butyl ether, and -|60|% or more but not more than 64|% o
3909509040 Preparation containing by weight: -|34|% or more but not more than 36|% of ethoxylated|polyurethane modified with hydrophobic groups, -|37|% or more but not more than 39|% of propylene glycol, and -|26|% or more but not more than 28|% of water
3909509090 Other
3910 Silicones in primary forms
3910000010 Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9 % or more
3910000015 Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated
3910000020 Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]
3910000025 Preparations containing by weight: -|10|% or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5)and -|10|% or more, α-Butyldimethylsilyl- ω -3-​[(2-​methyl-​1-​oxo-​2
3910000035 Preparations containing by weight: -|30|% or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6) and -|10|% or more,| N,N - Dimethylacrylamide (CAS RN 2680-03-7)
3910000040 Silicones|of a kind|used in the manufacture of long term surgical implants
3910000045 Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of|38-100|mPa·s (CAS RN 70131-67-8)
3910000050 Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum
3910000055 Preparation containing by weight: -|55|% or more but not more than|65|% of vinyl terminated|polydimethylsiloxane (CAS RN 68083-19-2), -|30|% or more but not more than|40|% of dimethylvinylated and|trimethylated silica (CAS RN|68988-89-6), and -|1|%
3910000060 Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups
3910000065 Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4)
3910000070 Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices
3910000075 Copolymer of 80 % dimethylsiloxane, 10 % methyl methacrylate and 10 % butyl acrylate in the form of a white powder
3910000080 Monomethacryloxypropylterminated poly(dimethylsiloxane)
3910000090 Other
3911 Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in note|3|to this chapter, not elsewhere specified or included, in primary forms
391110 Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes
3911100010 For cavity filling, for use in certain types of aircraft
3911100081 Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75|% by weight C-5|to C-12|cycloaliphatic alkenes and more than 10|% but not more than 25|% by weight aromatic alkenes yielding a hydrocarbon resin with: -|an iodine value of mo
3911100090 Other
391120 Poly(1,3-phenylene methylphosphonate)
391190 Other
39119011 Condensation or rearrangement polymerisation products whether or not chemically modified
39119011 Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene), in one of the forms mentioned in note|6(b) to this chapter
39119013 Poly(thio-1,4-phenylene)
39119019 Other
3911901910 Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4'-biphenylene)
3911901915 Polyetherimide of 4,4'-[(isopropylidene)bis(p-phenylenoxy)]diphthalic dianhydride and 1,3-benzenediamine or 1,4-benzenediamine (CAS RN 61128-46-9 or CAS RN 61128-47-0)
3911901920 Set of two components, in a volume ratio of 1:1, intended to produce a thermosetting polydicyclopentadiene after mixing, both components containing: -|83|% or more by weight of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), -|a synthetic
3911901930 Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide
3911901940 m- Xylene formaldehyde resin
3911901970 Preparation, containing: -|Cyanic acid, C,C'-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1), -|1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0), -|in a solution of butanone|(CAS RN 78-93-3) with a content of less than|
3911901990 Other
39119092 Other
39119092 Copolymer of p-cresol and divinylbenzene, in the form of a solution in N,N-dimethylacetamide containing by weight 50|% or more of polymer; hydrogenated copolymers of vinyltoluene and α-methylstyrene
39119099 Other
3911909910 For cavity filling, for use in certain types of aircraft
3911909923 Other
3911909923 Aqueous solution consisting of by weight 25 % or more, but not more than 40 % of a poly(isobutylene-maleic anhydride) modified with: -N,N-dimethylpropane-1,3-diamine, -a copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy e
3911909925 Copolymer of vinyltoluene and α-methylstyrene
3911909928 Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form
3911909935 Alternated copolymer of ethylene and maleic anhydride (EMA)
3911909938 Mixture containing by weight: -90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and -10 % (± 1 %) of a hydrogenated s
3911909940 Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9|% or more but not more than 16|% by weight
3911909943 Copolymer of α-methylstyrene and styrene, having a softening point of more than 113|ºC
3911909945 Copolymer of maleic acid and methyl vinyl ether
3911909948 Mixture containing by weight: -90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and -10 % (± 1 %) of an ethylene-prop
3911909953 Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)
3911909957 Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)
3911909960 Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (M@n) of not more than 4500, in flake or powder form
3911909963 Mixture, containing by weight: - 20% or more but not more than 40% of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0), - 7% or more but not more than 20% of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-
3911909965 Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether
3911909970 Aqueous solution containing by weight: -|30|% or more but not more than 40|% of poly-4-vinylpyridine-N-oxide, -|0,1|% or more but not more than 4|% of isonicotinic acid-N-oxide, -|0,1|% or more but not more than 3,5|% of sodium sulphate, -|0,1|%
3911909986 Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)
3911909990 Other
3912 Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms
391211 Cellulose acetates
391211 Non-plasticised
3912110020 Cellulose acetate flakes
3912110030 Cellulose triacetate (CAS RN 9012-09-3)
3912110040 Cellulose diacetate|powder
3912110090 Other
391212 Plasticised
391220 Cellulose nitrates (including collodions)
39122011 Non-plasticised
39122011 Collodions and celloidin
39122019 Other
39122090 Plasticised
391231 Cellulose ethers
391231 Carboxymethylcellulose and its salts
391239 Other
39123920 Hydroxypropylcellulose
39123985 Other
3912398510 Ethylcellulose, not plasticized
3912398520 Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27|(±|3)|% of ethylcellulose
3912398530 Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3|or more carbon atoms
3912398540 Hypromellose (INN) (CAS RN 9004-65-3)
3912398550 Polyquaternium 10|(CAS|RN|68610-92-4)
3912398590 Other
391290 Other
39129010 Cellulose esters
3912901020 Hydroxypropyl methylcellulose phthalate
3912901090 Other
39129090 Other
3913 Natural polymers (for example, alginic acid) and modified natural polymers (for example, hardened proteins, chemical derivatives of natural rubber), not elsewhere specified or included, in primary forms
391310 Alginic acid, its salts and esters
3913100020 Sodium alginate extracted from brown seaweed, with - a loss on drying of not more than 15 % by weight (4h at 105 °C), - a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight
3913100090 Other
391390 Other
3913900020 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)
3913900030 Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350|000
3913900040 Xanthan gum
3913900085 Sodium hyaluronate
3913900085 Sterile|sodium hyaluronate (CAS RN 9067-32-7)
3913900087 Non sterile
3913900087 With: - a weight average molecular weight (Mw) of not more than 900 000, - an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg, - an ethanol content of not more than 1% by weight, - an isopropanol content of not more than 0,5% by weight
3913900088 Other
3913900095 Chondroitinsulphuric acid, sodium salt|(CAS RN 9082-07-9)
3913900099 Other
3914 Ion-exchangers based on polymers of headings|3901|to 3913, in primary forms
3915 II. WASTE, PARINGS AND SCRAP; SEMI-MANUFACTURES; ARTICLES
3915 Waste, parings and scrap, of plastics
391510 Of polymers of ethylene
391520 Of polymers of styrene
391530 Of polymers of vinyl chloride
391590 Of other plastics
39159011 Of polymers of propylene
39159080 Other
3916 Monofilament of which any cross-sectional dimension exceeds 1|mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics
391610 Of polymers of ethylene
3916100010 For use in certain types of aircraft
3916100090 Other
391620 Of polymers of vinyl chloride
3916200010 For use in certain types of aircraft
3916200091 Other
3916200091 Profiles of poly(vinyl chloride) of a kind|used in the manufacture of|sheet pilings and facings, containing the following additives: -|titanium dioxide -|poly(methyl methacrylate) -|calcium carbonate -|binding agents
3916200099 Other
391690 Of other plastics
39169010 Of condensation or rearrangement polymerisation products, whether or not chemically modified
3916901010 Rods with cellular structure, containing by weight: -|polyamide-6|or poly(epoxy anhydride) -|7|% or more but not more than 9|% of polytetrafluorethylene if present -|10|% or more but not more than 25|% of inorganic fillers
3916901090 Other
39169050 Of addition polymerisation products
3916905010 For use in certain types of aircraft
3916905090 Other
39169090 Other
3917 Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics
391710 Artificial guts (sausage casings) of hardened protein or of cellulosic materials
39171010 Of hardened protein
39171090 Of cellulosic materials
391721 Tubes, pipes and hoses, rigid
391721 Of polymers of ethylene
39172110 Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917211010 For use in certain types of aircraft
3917211090 Other
39172190 Other
3917219010 With fittings attached, for use in civil aircraft
3917219020 For use in certain types of aircraft
3917219090 Other
391722 Of polymers of propylene
39172210 Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917221010 For use in certain types of aircraft
3917221090 Other
39172290 Other
3917229010 With fittings attached, for use in civil aircraft
3917229020 For use in certain types of aircraft
3917229090 Other
391723 Of polymers of vinyl chloride
39172310 Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
3917231010 For use in certain types of aircraft
3917231090 Other
39172390 Other
3917239010 With fittings attached, for use in civil aircraft
3917239020 For use in certain types of aircraft
3917239090 Other
391729 Of other plastics
3917290011 Of addition polymerisation products
3917290011 For use in certain types of aircraft
3917290019 Other
3917290091 Other
3917290091 With fittings attached, for use in civil aircraft
3917290099 Other
391731 Other tubes, pipes and hoses
391731 Flexible tubes, pipes and hoses, having a minimum burst pressure of 27,6|MPa
3917310010 With fittings attached, for use in civil aircraft
3917310020 For use in certain types of aircraft
3917310030 Tubings: -with an outer diameter of 0,33 mm or more but not more than 3,3 mm, -with an inner diameter of 0,01 mm or more but not more than 2,1 mm, -suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, -suitable for all solutions
3917310090 Other
391732 Other, not reinforced or otherwise combined with other materials, without fittings
3917320010 For use in certain types of aircraft
3917320020 Tubings: -with an outer diameter of 0,33 mm or more but not more than 3,3 mm, -with an inner diameter of 0,01 mm or more but not more than 2,1 mm, -suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, -suitable for all solutions
3917320030 Heat shrinkable tube: -containing by weight 80 % or more polymer, -with an insulation resistance of 90 MW or more, -with a dielectric strength of 35 kV / mm or more, -with a wall thickness of 0,04 mm or more, but not more than 0,9 mm, -with a la
3917320090 Other
391733 Other, not reinforced or otherwise combined with other materials, with fittings
3917330010 With fittings attached, for use in civil aircraft
3917330090 Other
391739 Other
3917390010 With fittings attached, for use in civil aircraft
3917390020 Other
3917390020 Tubings: -with an outer diameter of 0,33 mm or more but not more than 3,3 mm, -with an inner diameter of 0,01 mm or more but not more than 2,1 mm, -suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, -suitable for all solutions
3917390091 For use in certain types of aircraft
3917390099 Other
391740 Fittings
3917400010 For use in civil aircraft
3917400020 Other
3917400020 Plastic fittings (kit of nuts and ferrules or nuts) and connectors: -threaded, -supported with or without a stainless steel ring, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,  for tubings with: -outer
3917400091 Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses
3917400099 Other
3918 Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9|to this chapter
391810 Of polymers of vinyl chloride
39181010 Consisting of a support impregnated, coated or covered with poly(vinyl chloride)
3918101010 For use in certain types of aircraft
3918101090 Other
39181090 Other
3918109010 For use in certain types of aircraft
3918109090 Other
391890 Of other plastics
3918900010 For use in certain types of aircraft
3918900090 Other
3919 Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls
391910 In rolls of a width not exceeding 20|cm
39191012 Strips, the coating of which consists of unvulcanised natural or synthetic rubber
39191012 Of poly(vinyl chloride) or of polyethylene
39191015 Of polypropylene
39191019 Other
3919101910 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other sid
3919101990 Other
39191080 Other
3919108010 For use in certain types of aircraft
3919108025 Other
3919108025 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other sid
3919108027 Polyester film: -|coated on one side|with an acrylic thermal release adhesive that debonds at temperatures of|90|°C or more but not more than|200|°C, and a polyester liner, and -|on the other side not coated or coated with an acrylic pressure sensitiv
3919108035 Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visib
3919108037 Polytetrafluoroethylene film: -|with a thickness of 100|µm or more, -|an elongation at break of not more than 100|%, -|coated on one side with a pressure sensitive silicon adhesive
3919108040 Black poly(vinyl chloride) film: •with a gloss of more than 30 degrees according to ASTM D2457, •whether or not covered on one side with a protective poly(ethylene terephthalate) film, and on the other side with a pressure sensitive adhesive with chann
3919108043 Ethylene vinyl acetate film: -|of|a thickness of 100|µm or more, -|coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester|or polypropylene liner
3919108045 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38|mm or more but not more than 1,53|mm
3919108048 Plastic strips of polypropylene, -self-adhesive, -unilaterally adhesive-coated with an Acrylic Polymer, -in rolls with a width of 20 cm or less, -with a thickness including adhesion layer of 0,03 mm or less, for use in the manufacturing of lithium
3919108050 Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs
3919108055 Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90|º of more than 25
3919108057 Reflecting sheet: -|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -|covered on one or both sides with one or more layers of plastic or metallisation, and -|whether or not covered on one side with a self-
3919108063 Reflecting film consisting of -|a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, -|a layer of an acrylic resin having embedded glass beads,
3919108073 Self-adhesive reflecting sheet whether or not in segmented pieces, -|whether or not containing a watermark, -|with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: -|a layer of acrylic or vinyl po
3919108075 Self adhesive reflecting film, consisting of several layers including: -|a copolymer of acrylic resin, -|polyurethane,| -|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications
3919108085 Poly(vinyl chloride), poly(ethyleneterephthalate), polyethylene or any other polyolefin film: -coated on one side with an acrylic UV-sensitive adhesive and a liner -of a total thickness of 65 μm or more without release liner
3919108090 Other
391990 Other
39199020 Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers
39199080 Other
3919908010 For use in certain types of aircraft
3919908019 Other
3919908019 Transparent poly(ethylene terephthalate) self-adhesive film: -|free from impurities or faults, -|coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic cho
3919908020 Polyester film: -|coated on one side|with an acrylic thermal release adhesive that debonds at temperatures of|90|°C or more but not more than|200|°C, and a polyester liner, and -|on the other side not coated or coated with an acrylic pressure sensitiv
3919908021 Polytetrafluoroethylene film, -|with a thickness of 50|µm or more but not more than 155|µm, -|with a width of 6,30|mm or more but not more than 585|mm, -|an elongation at break of not more than 200|%, and -|coated on one side with a pressure sensi
3919908022 Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more but not more than 160 cm
3919908023 Film consisting of 1|to 3|laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure
3919908024 Reflecting laminated sheet: -|consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, -|covered on both sides with one or more layers of plastic material and -|covered on one side with an adhesive layer and a release
3919908026 Ethylene vinyl acetate film: -|of|a thickness of 100|µm or more, -|coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester|or polypropylene liner
3919908028 Poly(vinyl chloride), poly(ethyleneterephthalate), polyethylene or any other polyolefin film: -coated on one side with an acrylic UV-sensitive adhesive and a liner -of a total thickness of 65 μm or more without release liner
3919908030 Reflecting sheet: -|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -|covered on one or both sides with one or more layers of plastic or metallisation, and -|whether or not covered on one side with a self-
3919908031 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other sid
3919908033 Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60|μm or more, but not more than 70|μm, and with a width of more than 1|245|mm but not more
3919908035 Reflecting layered sheet on rolls, with a width of more than 20|cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with: -|a layer of polyurethane containing glass micro beads, -|a layer of poly(ethylen
3919908037 Polyethylene or polycarbonate film, cut into ready to use forms, -|one side partly printed whereby part of the printing either gives information about the meaning of LED's visible at the unprinted areas, or marks those points which must be touched to op
3919908041 Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs
3919908043 Black poly(vinyl chloride) film: •with a gloss of more than 30 degrees according to ASTM D2457, •whether or not covered on one side with a protective poly(ethylene terephthalate) film, and on the other side with a pressure sensitive adhesive with chann
3919908045 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38|mm or more but not more than 1,53|mm
3919908049 Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet
3919908050 Self-adhesive reflecting sheet whether or not in segmented pieces, -|whether or not containing a watermark, -|with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: -|a layer of acrylic or vinyl po
3919908051 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 90μm, covered on one side with an adhesive layer and a release sheet
3919908053 Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90|º of more than 25
3919908054 Poly(vinyl chloride) film, on one side covered with - a polymer layer - an adhesive layer - a release liner, on one side embossed, containing oblate spheres; whether or not on the other side covered with an adhesive layer and a metallised polymer layer
3919908065 Self-adhesive film with a thickness of 40 µm or more, but not more than 475 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side wi
3919908070 Self-adhesive polishing discs of microporous polyurethane, whether or not|coated with a|pad
3919908080 Self adhesive reflecting film, consisting of several layers including: -|a copolymer of acrylic resin, -|polyurethane,| -|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications
3919908082 Reflecting film consisting of: -|a polyurethane layer, -|a glass microspheres layer, -|a metallised aluminium layer, and -|an adhesive, covered on one or both sides with a release liner, -|whether or not a poly(vinyl chloride) layer, -|a layer wheth
3919908083 Reflector or diffuser sheets, in rolls, -for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or -for equal transmission and distribution of light, intended for LCD modules
3919908099 Other
3920 Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
392010 Of polymers of ethylene
39201023 Of a thickness not exceeding 0,125|mm
39201023 Of polyethylene having a specific gravity of
39201023 Less than 0,94
39201023 Polyethylene film, of a thickness of 20|micrometres or more but not exceeding 40|micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
39201024 Stretch film, not printed
3920102410 For use in certain types of aircraft
3920102490 Other
39201025 Other
3920102505 For use in certain types of aircraft
3920102530 Other
3920102530 Mono-layered High-Density Polyethylene film: -containing by weight 99 % or more of polyethylene, -with a thickness of 12 μm or more but not more than 20 μm, -with a length of 4000 m or more but not more than 7000 m, -with a width of 600 mm or more
3920102590 Other
39201028 0,94|or more
3920102810 For use in certain types of aircraft
3920102891 Other
3920102891 Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has th
3920102899 Other
39201040 Other
3920104010 For use in certain types of aircraft
3920104040 Other
3920104040 Tubular layered film predominately of polyethylene: -|consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on| either side with a layer of polyamide, covered on either side with at least one layer of polyethylene, -|ha
3920104099 Other
39201081 Of a thickness exceeding 0,125|mm
39201081 Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15|%, containing poly(vinyl alcohol) dissolved in water as the moistenin
39201089 Other
3920108910 For use in certain types of aircraft
3920108925 Other
3920108925 Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs
3920108940 Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8|mm or more but not exceeding 1.2|mm
3920108945 Octene and ethylene copolymer plastic film of a thickness of 0,45 mm or more but not more than 0,75 mm, for use in the manufacture of glass to glass photovoltaic solar panels
3920108955 Ethylene vinyl acetate (EVA) film: - with a raised relief surface with embossed undulations, - not laminated, - not cross-linked, and - with a thickness of more than 0,3 mm
3920108990 Other
392020 Of polymers of propylene
39202021 Of a thickness not exceeding 0,10|mm
39202021 Biaxially oriented
3920202110 For use in certain types of aircraft
3920202140 Sheets of biaxially - oriented polypropylene|film: -|with the thickness of not more than 0,1|mm, -|printed on both sides with specialised coatings to allow banknote security printing
3920202150 Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron
3920202190 Other
39202029 Other
3920202910 For use in certain types of aircraft
3920202960 Other
3920202960 Mono-axial oriented film, of a total thickness of not more than 75µm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: -|a tensil
3920202970 Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: -|a thickness of 55|µm or more
3920202994 Mono-axial oriented, co-extruded film: -consisting of 3 to 5 layers, -each layer mainly consisting of polypropylene and/or polyethylene, -each layer containing not more than 10 % by weight of other polymers, -whether or not containing titanium dio
3920202999 Other
39202080 Of a thickness exceeding 0,10|mm
3920208010 For use in certain types of aircraft
3920208090 Other
392030 Of polymers of styrene
3920300010 Acrylonitrile-butadiene-styrene, for use in certain types of aircraft
3920300090 Other
392043 Of polymers of vinyl chloride
392043 Containing by weight not less than 6|% of plasticisers
39204310 Of a thickness not exceeding 1|mm
3920431010 For use in certain types of aircraft
3920431092 Other
3920431092 Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60|µm or more but not more than 80|µm, containing 30|or more but not more than 40|parts of plasticizer to 100|parts of poly(vinyl
3920431094 Film of a specular gloss of 70|or more, measured at an angle of 60|° using a glossmeter (as determined by the ISO 2813:2000|method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,
3920431095 Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet
3920431099 Other
39204390 Of a thickness exceeding 1|mm
3920439010 For use in certain types of aircraft
3920439090 Other
392049 Other
39204910 Of a thickness not exceeding 1|mm
3920491010 For use in certain types of aircraft
3920491030 Other
3920491030 Film of a (polyvinyl)chloride-copolymer -|containing by weight 45|% or more of fillers -|on a support
3920491093 Film of a specular gloss of 70|or more, measured at an angle of 60|° using a glossmeter (as determined by the ISO 2813:2000|method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,
3920491099 Other
39204990 Of a thickness exceeding 1|mm
3920499010 For use in certain types of aircraft
3920499090 Other
392051 Of acrylic polymers
392051 Of poly(methyl methacrylate)
3920510020 Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5|mm or more but not more than 19|mm
3920510030 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 90μm
3920510040 Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)
3920510050 Sheets of polymethylmethacrylate conforming to standard — EN 4364 (MIL-P-5425E) and DTD5592A, or — EN 4365 (MIL-P-8184) and DTD5592A
3920510090 Other
392059 Other
39205910 Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150|micrometres
39205990 Other
392061 Of polycarbonates, alkyd resins, polyallyl esters or other polyesters
392061 Of polycarbonates
3920610030 Reflecting sheet: -|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -|covered on one or both sides with one or more layers of plastic or metallisation, and -|whether or not covered on one side with a self-
3920610040 Extruded thermoplastic foils or films of polycarbonate with: - matt surface texture on both sides - a thickness of more than 50 μm but not more than 200 μm, - a width of 800 mm or more, but not more than 1 500 mm, and - a length of 300 m or more, but not
3920610050 Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a: -total thickness of more than 230 μm but not more than 270 μm, -top layer thickness of more than 40 μm but not more than 55 μm, -defined surface roughness of t
3920610090 Other
392062 Of poly(ethylene terephthalate)
39206212 Of a thickness not exceeding 0,35|mm
39206212 Poly(ethylene terephthalate) film, of a thickness of 72|micrometres or more but not exceeding 79|micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100|micrometres or more but not exceeding 15
39206219 Other
3920621905 Poly(ethylene terephthalate) film in rolls: -|with a thickness of 0,335|mm or more but not more than 0,365|mm, and -|coated with a gold layer with a|thickness of 0,03|μm or more but not more than 0,06|μm
3920621908 Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25|µm, either: -|only dyed in the mass, or -|dyed in the mass and metallised on one side
3920621912 Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120|µm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material
3920621918 Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120|µm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoate
3920621920 Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers
3920621938 Poly(ethylene terephthalate) film, of a thickness of not more than 12|µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35|nm
3920621948 Sheets or rolls of poly(ethylene terephthalate): -|coated on both sides with a layer of epoxy acrylic resin, -|of a total thickness of 37|μm (±|3|μm)
3920621952 Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1|% of aluminium, of a thickness of not more than 300|µm and having a surface resist
3920621960 Poly (ethylene terephtalate) film: -|of a thickness of not more than 20|µm, -|coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more th
3920621968 Poly(ethylene terephthalate) film in rolls: -with a thickness of 50 μm or more but not more than 350 μm, and -covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm
3920621976 Transparent poly(ethylene terephthalate) film: -|coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7|nm or more but not more than 80|nm, -|with a surface tension of 36|Dyne/cm or more but not more than 39|D
3920621999 Other
39206290 Of a thickness exceeding 0,35|mm
3920629010 Poly(ethylene terephthalate) film in rolls: -|with a thickness of 0,335|mm or more but not more than 0,365|mm, and -|coated with a gold layer with a|thickness of 0,03|μm or more but not more than 0,06|μm
3920629020 Poly(ethylene terephthalate) film in rolls: -with a thickness of 50 μm or more but not more than 350 μm, and -covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm
3920629090 Other
392063 Of unsaturated polyesters
392069 Of other polyesters
3920690020 Film of poly(ethylene naphthalene-2,6-dicarboxylate)
3920690030 Mono- or multilayer, transverse oriented, shrink film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyester
3920690050 Monolayer, biaxially oriented film: -|composed of more than 85|% by weight of poly(lactic acid) and not more than 10,50|% by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc, -|having a thickness of 20|µm or more but not
3920690060 Monolayer, transverse oriented, shrink film: -|composed of more than 80|% by weight of poly(lactic acid) and not more than 15,75|% by weight of additives of modified poly(lactic acid), -|having a thickness of 45|µm or more but not more than 50|µm, -
3920690070 Mono- or multilayer, biaxially oriented film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters, -wi
3920690090 Other
392071 Of cellulose or its chemical derivatives
392071 Of regenerated cellulose
392073 Of cellulose acetate
39207310 Film in rolls or in strips, for cinematography or photography
39207380 Other
392079 Of other cellulose derivatives
39207910 Of vulcanised fibre
3920791010 Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm
3920791090 Other
39207990 Other
392091 Of other plastics
392091 Of poly(vinyl butyral)
3920910010 For use in certain types of aircraft
3920910052 Other
3920910052 Poly(vinyl butyral) film: -|containing by weight| 26|% or more but not more than|30|% of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser, -|with a thickness|of 0,73|mm or more but not more than 1,50|mm
3920910091 Poly(vinyl butyral) film having a graduated coloured band
3920910093 Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: -|a visible light transmissio
3920910095 Co-extruded trilayer poly(vinyl butyral) film
3920910095 Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29|% or more but not more than 31|% of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser
3920910097 Other
3920910099 Other
392092 Of polyamides
392093 Of amino-resins
392094 Of phenolic resins
392099 Of other plastics
39209921 Of condensation or rearrangement polymerisation products, whether or not chemically modified
39209921 Polyimide foil and strip, uncoated, or coated or covered solely with plastic
39209928 Other
3920992840 Polymer film containing the following monomers: -|poly (tetramethylene ether glycol), -|bis (4-isocyanotocyclohexyl) methane, -|1,4-butanediol or 1,3-butanediol, -|with a thickness of 0,25|mm or more but not more than 5,0|mm, -|embossed with a r
3920992845 Transparent polyurethane film metallised on one side: -|with a gloss of more than 90|degrees according to ASTM|D2457 -|covered on the metalized side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer -|covered on t
3920992848 Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine dir
3920992850 Thermoplastic polyurethane film, of a thickness of 250|μm or more but not more than 350|μm, covered on one side with a removable protective film
3920992865 Matt, thermoplastic polyurethane foil in rolls with: -|a width of 1640|mm| (± 10|mm), -|a gloss of 3,3|degrees or more but not more than 3,8|(as determined by the method ASTM D2457), -|a surface roughness of 1,9|Ra or more but not more than 2,8|Ra (
3920992870 Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: -|microspheres with a coating of metal, whether or not alloyed with gold, -|an adhesive layer, -|with a protective|layer of silicone or poly(ethylene terephthalate)
3920992890 Other
39209952 Of addition polymerisation products
39209952 Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97|% or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1|mm
39209953 Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells
39209959 Other
3920995910 For use in certain types of aircraft
3920995925 Other
3920995925 Poly(1-chlorotrifluoroethylene) film
3920995930 Poly(tetrafluoroethylene) film containing by weight 10 % or more of graphite
3920995955 Ion-exchange membranes of fluorinated plastic material
3920995965 Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34|µm or more but not more than 90|µm, a tensile strength at break of 20|MPa or more but not more than 55|MPa and an elongation at break of 250|% or more but not more than 900|%
3920995975 Film of fluorinated ethylene propylene resin (CAS RN 25067-11-2) with: -|a thickness of 0,010|mm or more but not more than 0,80|mm, -|a width of 1|219|mm or more but not more than 1|575|mm, and -|a melting point of 252|°C (measured according ASTM D-
3920995990 Other
39209990 Other
3920999020 Anisotropic conductive film, in rolls, of a width of 1,2|mm or more but not more than 3,15|mm and a maximum length of 300|m, used for joining electronic components in the production of LCD or plasma displays
3920999090 Other
3921 Other plates, sheets, film, foil and strip, of plastics
392111 Cellular
392111 Of polymers of styrene
3921110010 Acrylonitrile butadiene styrene, for use in certain types of aircraft
3921110090 Other
392112 Of polymers of vinyl chloride
3921120020 For use in certain types of aircraft
3921120090 Other
392113 Of polyurethanes
39211310 Flexible
3921131010 Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092
3921131020 Rolls of open-cell polyurethane foam: -|with a thickness of 2,29|mm (±|0,25|mm), -|surface-treated with a foraminous adhesion promoter, and -|laminated to a polyester film and|a layer of textile material
3921131090 Other
39211390 Other
392114 Of regenerated cellulose
3921140020 Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)
3921140080 Other
392119 Of other plastics
3921190010 For use in certain types of aircraft
3921190030 Other
3921190030 Blocks with cellular structure, containing by weight: -|polyamide-6|or poly(epoxy anhydride) -|7|% or more but not more than 9|% of polytetrafluorethylene if present -|10|% or more but not more than 25|% of inorganic fillers
3921190040 Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: -|a width of 98|mm or more but not more than170|mm, -|a thickness of 15|µm or more but not more than 36|µm, of a kind used for the manufacture of alkaline ba
3921190045 Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (TD) shrinkage, -a total thickness of 8 μm or more, but not more than 50 
3921190050 Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with -|a total thickness of more than 0,05|mm but not more than 0,20|mm, -|a water entry pressure between 5|and 200|kPa according to|ISO 811, and -|
3921190060 Multi-porous multilayer separator foil with: -|one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides, -|a width of 65|mm or more but not more than 170|m
3921190070 Microporous membranes of expanded Polytetrafluoroethylene (ePTFE) in rolls, having: -|a width of 1|600|mm or more but not more than 1|730|mm, and -|a membrane thickness of|15|μm or more, but not more than 50|μm for use in the manufacture of a bi-compo
3921190093 Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment
3921190095 Film of polyethersulfone, of a thickness of not more than 200|µm
3921190099 Other
392190 Other
39219010 Of condensation or rearrangement polymerisation products, whether or not chemically modified
39219010 Of polyesters
3921901005 Corrugated sheet and plates
3921901010 Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres
3921901020 Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin
3921901030 Multilayer film consisting of: -|a poly(ethylene terephthalate) film with a thickness of more than 100|µm but not more than 150|µm, -|a primer of phenolic material with a thickness of more than 8|µm but not more than 15|µm, -|an adhesive layer of a
3921901090 Other
39219030 Of phenolic resins
39219041 Of amino-resins
39219041 Laminated
39219041 High-pressure laminates with a decorative surface on one or both sides
39219043 Other
39219049 Other
39219055 Other
3921905525 Prepreg sheets or rolls containing polyimide resin
3921905535 Glass fibre impregnated with epoxy resin for use in the manufacture of smart cards
3921905540 Three layered fabric sheet, in rolls, -|comprising a core layer of 100|% Nylon Taffeta or Nylon/Polyester blended Taffeta, -|coated on both sides with polyamide , -|of a total thickness not more than 135|μm, -|of a total weight not more than 80|g/
3921905560 Membrane composed of a polyamide layer and a polysulfone layer on a cellulose support layer with: -a total thickness of 0,25 mm or more but not more than 0,40 mm, -a total weight of 109 g/m² or more but not more than 114 g/m²
3921905590 Other
39219060 Of addition polymerisation products
3921906010 For use in certain types of aircraft
3921906035 Other
3921906035 Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells
3921906099 Other
39219090 Other
3922 Baths, shower-baths, sinks, washbasins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics
392210 Baths, shower-baths, sinks and washbasins
392220 Lavatory seats and covers
392290 Other
3923 Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics
392310 Boxes, cases, crates and similar articles
39231010 Boxes, cases, crates and similar articles, of plastic, specially shaped or fitted for the conveyance or packing of semiconductor wafers, masks, or reticles
39231090 Other
3923109010 Photomask or wafer compacts: -|consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties, -|having non porous, abrasion resistant or impact resistant surface properties, -|fi
3923109090 Other
392321 Sacks and bags (including cones)
392321 Of polymers of ethylene
392329 Of other plastics
39232910 Of poly(vinyl chloride)
39232990 Other
392330 Carboys, bottles, flasks and similar articles
39233010 Of a capacity not exceeding two litres
39233090 Of a capacity exceeding two litres
392340 Spools, cops, bobbins and similar supports
39234010 Spools, reels and similar supports for photographic and cinematographic film or for tapes, films and the like of heading|8523
39234090 Other
392350 Stoppers, lids, caps and other closures
39235010 Caps and capsules for bottles
39235090 Other
392390 Other
3924 Tableware, kitchenware, other household articles and hygienic or toilet articles, of plastics
392410 Tableware and kitchenware
3924100011 Kitchenware containing polyamide or melamine
3924100011 Consigned from China or Hong Kong
3924100019 Other
3924100020 Polycarbonate infant feeding bottles
3924100090 Other
392490 Other
3924900010 Ironing boards, including sleeve boards, whether or not free standing, and legs and tops thereof
3924900090 Other
3925 Builders' ware of plastics, not elsewhere specified or included
392510 Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300|litres
392520 Doors, windows and their frames and thresholds for doors
392530 Shutters, blinds (including venetian blinds) and similar articles and parts thereof
392590 Other
39259010 Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings
39259020 Trunking, ducting and cable trays for electrical circuits
39259080 Other
3926 Other articles of plastics and articles of other materials of headings|3901|to 3914
392610 Office or school supplies
392620 Articles of apparel and clothing accessories (including gloves, mittens and mitts)
392630 Fittings for furniture, coachwork or the like
3926300040 Plastic internal door handle used in the manufacture of motor vehicles
3926300050 Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and -a PVC foil, -not containing layers of copper, nickel or chromium, for use in the manufac
3926300090 Other
392640 Statuettes and other ornamental articles
392690 Other
39269050 Perforated buckets and similar articles used to filter water at the entrance to drains
39269060 Protective face shields/visors
39269097 Other
3926909705 For technical uses, for use in civil aircraft
3926909710 Microspheres of a polymer of divinylbenzene, of a diameter of 4,5|µm or more but not more than 80|µm
3926909715 Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems
3926909720 Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on
3926909723 Plastic cover with clips|for the exterior rear-view mirror of motor vehicles
3926909727 Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle|and the base of a rear-view mirror
3926909730 Parts of car radio and car air-conditioner front panels -|of acrylonitrile-butadiene-styrene with or without polycarbonate, -|coated with a copper, a nickel and a chrome layers, -|with a total thickness of coating of 5,54|μm or more but not more tha
3926909733 Housings, housing parts, drums, setting wheels, frames, covers, upper part, design plate and other parts of acrylonitrile-butadiene-styrene, polycarbonate, polymethylmethacrylate or thermoplastic polyurethane, of a kind used for the manufacture of remote
3926909740 Silicone shell for breast implant 
3926909743 Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 µm or more but not more than 4,95 μm
3926909748 Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and -a PVC foil, -not containing layers of copper, nickel or chromium, for use in the manufac
3926909750 Knob of car radio front panel, made of Bisphenol A-based polycarbonate, in immediate packings of not less than 300 pieces
3926909758 Plastic ferrules and/or plugs: -supported with or without a stainless steel ring, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, for tubings with: -outer diameter of 0,33 mm or more but not more than 3,3 
3926909760 Sheath contraceptives of polyurethane
3926909777 Silicone decoupling ring with an inner diameter of 14,7mm or more but no more than 16,0mm, in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems
3926909790 Other

Discover World By Trade Data

The importance of accurate HS code or Harmonized System code classification cannot be overstated in international trade. With the complexity and vastness of global trade, using a reliable platform like TradeImeX is essential for efficient HS code retrieval and analysis. TradeImeX simplifies the process of finding and utilizing HS codes by providing a comprehensive and up-to-date database, along with powerful search functionalities. By leveraging the data resources offered by TradeImeX, businesses can optimize their trade operations, navigate regulatory requirements, and make informed decisions based on reliable trade data. TradeImeX helps businesses comply with customs regulations by providing the most up-to-date HS codes. This ensures smooth customs clearance and minimizes the chances of audits or penalties. Experience the power of HS codes with TradeImeX and unlock the full potential of international trade today.

OverView Of HS Code

What are HS Codes?

HS codes, also known as Harmonized System codes, are a standardized numerical classification system used to classify and identify products in international trade. These codes are recognized and utilized by customs authorities worldwide to streamline the movement of goods across borders.

HS CODE

A Powerfull Bit Of Information

The importance of accurate HS code classification:

  • Ensuring compliance with import and export regulations
  • Facilitating trade negotiations and agreements
  • Enabling proper identification and categorization of goods
  • Simplifying customs procedures and clearance

    • Accurate and up-to-date HS code database:

  • Detailed product descriptions and classifications
  • Comprehensive coverage of import and export data

    • Efficiency in trade analysis:

  • Identifying market trends and opportunities
  • Analyzing import/export volumes and values
  • Tracking competitors' activities

    • The Significance of HS Codes in Global Trade

    Regulatory Compliance:

    HS codes are pivotal in ensuring compliance with customs regulations and trade policies of different countries. By accurately classifying products with the appropriate HS codes, importers and exporters can avoid delays, penalties, and other trade barriers.

    Trade Statistics and Analysis:

    HS codes enable governments and international organizations to collect and analyze trade data more efficiently. By categorizing products with standardized codes, the global trade community can generate meaningful insights, track market trends, and develop effective policies.

    Tariffs and Duties:

    HS codes are utilized to determine applicable tariffs and duties for imported or exported goods. Tariff rates often vary based on the classification of products, making HS codes crucial in calculating the costs associated with international trade.

    TradeImeX: Simplifying HS Codes

    TradeImeX is a cutting-edge platform that leverages technology to simplify the world of HS codes. With its user-friendly interface and comprehensive database, TradeImeX empowers businesses to streamline their import-export processes and enhance their overall efficiency. TradeImeX revolutionizes the way businesses manage HS codes through its advanced features and functionalities. By simply entering a product description or a keyword, users can quickly search for the appropriate HS code for their products. The platform's algorithm performs a sophisticated search, providing accurate and up-to-date results.

    HS codes are a standardized numerical classification system used to classify and identify products in international trade, recognized and utilized by customs authorities worldwide to streamline the movement of goods across borders.

    TradeImeX is essential for efficient HS code retrieval and analysis as it simplifies the process of finding and utilizing HS codes by providing a comprehensive and up-to-date database, along with powerful search functionalities.

    Though there are a few deviations, most nations in the globe harmonize their HS codes.

    The benefits of using an accurate and up-to-date HS code database include Saving time and effort by eliminating manual research, minimizing errors, reducing the risk of non-compliance, and enhancing transparency in trade data for better decision-making.

    TradeImeX offers keyword search with relevant suggestions and advanced filters for specific product categories as search functionalities for HS code retrieval.

    The six-digit HS code is divided into three sections: Headings (the first four digits), Subheadings (the next two digits), and Chapters (the first two digits). Depending on the nation of trade, the HS codes are further separated into 7 or 12-digit items.

    HS codes are pivotal in ensuring compliance with customs regulations and trade policies of different countries and also determine applicable tariffs and duties for imported or exported goods which are significant and crucial in global trade.

    With its user-friendly interface and comprehensive database, TradeImeX empowers businesses to streamline their import-export processes and enhance their overall efficiency.

    A standardized numerical categorization system used to identify and classify goods in international trade is called a Harmonized System (HS) code utilized by countries for trade data.

    HS code classification is helpful for businesses as, by simply entering a product description or a keyword, users can quickly search for the appropriate HS code for their products with customs regulations.
    Are you ready to skyrocket your profits? Contact us.
    Sales Partner Referral Partner